Available flash settings by
recording mode
1
When
is selected,
,
or
i
s set depending on the type of
subject and brightness.
- If you bring the flash too close to an
object, the object may be distorted or
discoloured by the heat or lighting from
the flash.
- When you take a picture beyond the
BWBJMBCMFnBTISBOHFUIFFYQPTVSFNBZ
not be adjusted properly and the picture
may become bright or dark.
- When the flash is being charged, the
flash icon blinks red, and you cannot
take a picture. When [AUTO LCD OFF]
is set, the LCD monitor turns off and the
status indicator lights.
- The white balance may not be properly
adjusted if the flash level is insufficient for
the subject.
- When the shutter speed is fast, the flash
effect may not be sufficient.
- It may take time to charge the flash if you
repeat taking a picture. Take a picture
after the access indication disappears.
- The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may
not be evident.
Available
Not available
Initial scene setting
33