THE FOLLOWING APPLIES ONLY IN GREAT BRITAIN
The rating plate is on the underside of the digital camera.
Caution for AC mains lead
For your safety, please read the following text carefully. This appliance is supplied with a
moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted
in this plug. Should the fuse need to be replaced please ensure that the replacement fuse
has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the
ASTA mark
g
k
or the BSI mark
k
on the body of the fuse. If the plug contains a removable
fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse
cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS IN-
SERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt
please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As these colours may not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black or blue. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured brown or red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS
MARKED WITH THE LETTER E, BY THE EARTH SYMBOL
OR COLOURED GREEN OR
GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF, KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ
from actual AC mains plug.
1. 2.
Open the fuse cover with a screwdriver. Replace the fuse and close or attach
the fuse cover.
5