Leica C-Lux 3 Digital Camera User Manual


  Open as PDF
of 74
 
[PROTECT] [SINGLE] - [MULTI] - [CANCEL]
:PVDBOTFUQSPUFDUJPOGPSQJDUVSFTZPVEPOPUXBOUUPCFEFMFUFECZ
mistake.
How to cancel all your DPOF PRINT settings:
1. Enter [DPOF PRINT] by pressing
.
2. Select [CANCEL] by pressing
 and press [MENU/SET].
3. Press
and confirm cancelling with [MENU/SET].
4. Press [MENU/SET] again to exit the PLAYBACK menu.
- With a printer supporting PictBridge, the date print settings of the printer
may take precedence so check if this is the case.
- Printing pictures recorded with other equipment might be impossible.
- If the file is not based on the DCF standard, the DPOF print setting can-
not be set.
1. Enter [PROTECT] by pressing .
2.
Select [SINGLE] or [MULTI] by pressing  and press [MENU/SET].
3. - In [SINGLE] mode select picture by pressing  and confirm
with [MENU/SET]. To unlock it, press [MENU/SET] again.
-
In [MULTI] mode select pictures by pressing  and mark
them by pressing [MENU/SET]. To unlock it, press [MENU/SET]
again.
Selected pictures are marked with
p
.
4. Continue editing from step 2 or press
to return to the PLAY-
BACK menu.
How to cancel all your PROTECT settings:
1. Enter [PROTECT] by pressing
.
2. Select [CANCEL] by pressing
 and press [MENU/SET].
3. Press
and confirm canceling with [MENU/SET].
4. Press [MENU/SET] again to exit the PLAYBACK menu.
- Even if you protect pictures in the built-in memory or a card, they will be
deleted if the built-in memory or the card is formatted.
&WFOJGZPVEPOPUQSPUFDUQJDUVSFTPOBO4%.FNPSZ$BSEPSBO4%)$
.FNPSZ$BSEUIFZDBOOPUCFEFMFUFEXIFOUIFDBSET8SJUF1SPUFDU
switch is set to [LOCK].
[DPOF PRINT] [SINGLE] - [MULTI] - [CANCEL]
A system to select which picture to print, how many copies of each
picture and with/without date stamp. Ask your photo printing store.
1. Enter [DPOF PRINT] by pressing
.
2.
Select [SINGLE] or [MULTI] by pressing  and press [MENU/SET].
3. - In [SINGLE] mode select picture by pressing  and confirm
with [MENU/SET].
- In [MULTI] mode select pictures by pressing
 and mark
them by pressing [MENU/SET].
4. Enter number of prints by pressing

.
Selected pictures are marked with .
5. To add date information press [DISPLAY]
Selected pictures are marked with .
6.
Confirm with [MENU/SET].
7. Continue editing from step 2 or press to return to the PLAY-
BACK menu.
50
 previous next