Filter
Top Products
97
t
Fine-Tuning White Balance
White balance can be “fine tuned” to compensate for variations in the color of the
light source or to introduce a deliberate color cast into an image.
White balance is
fine tuned using the White balance option in the shooting menu or by pressing the
WB button and rotating the sub-command dial.
❚❚The White Balance Menu
1 Select a white balance option.
Select White balance in the shooting menu (pg.
165), then highlight a white balance option and
press 2.
If an option other than Fluorescent,
Choose color temp., or Preset manual is
selected, proceed to Step 2.
If Fluorescent is
selected, highlight a lighting type and press 2.
If Choose color temp. is
selected, highlight a color temperature and press 2.
If Preset manual is
selected, choose a preset as described on page 106 before proceeding.
2 Fine tune white balance.
Use the multi selector to fine-tune white
balance.
White balance can be fine tuned on
the amber (A)–blue (B) axis and the green (G)–
magenta (M) axis.
The horizontal (amber-blue)
axis corresponds to color temperature, with
each increment equivalent to about 5 mired.
The vertical (green-magenta) axis has the
similar effects to the corresponding color compensation (CC) filters.
A
White Balance Fine Tuning
The colors on the fine-tuning axes are relative, not absolute.
For example, moving the cursor
to B (blue) when a “warm” setting such as J (incandescent) is selected for white balance will
make photographs slightly “colder” but will not actually make them blue.
Coordinates
Adjustment
Increase green
Increase magenta
Increase blue Increase amber
Green (G)
Magenta (M)
Blue (B) Amber (A)