Filter
Top Products
189
L
2 Adjust settings for group A.
Choose the flash control mode and output level for the
flash units in group A.
3 Adjust settings for group B.
Choose the flash control mode and output level for the
flash units in group B.
4 Select the channel.
5 Press J.
6 Compose the shot.
Compose the shot and arrange the flash units as shown below.
Note that the
maximum distance at which the remote flash units can be placed may vary with
shooting conditions.
7 Set the remote flash units to the selected channel.
Turn all the remote flash units on and set them to the channel selected in
Step 4.
See the Speedlight instruction manuals for details.
10 m/33 ft.
or less
30 ° or less
30 ° or less
60 ° or less
60 ° or less
5m/15ft.
or less
Camera
(built-in flash)
5m/15ft.
or less
Wireless remote
sensors on flash units
should face camera.