Filter
Top Products
123
t
The n icon will blink until shooting ends.
When
shooting ends, multiple exposure mode will end
and the n icon will no longer be displayed.
Repeat steps 1–7 to take additional multiple
exposures.
❚❚Interrupting Multiple Exposures
Selecting Multiple exposure in the shooting menu while a
multiple exposure is being recorded displays the options shown
at right.
To interrupt a multiple exposure before the specified
number of exposures have been taken, highlight Cancel and
press J.
If shooting ends before the specified number of
exposures has been taken, a multiple exposure will be created
from the exposures recorded to that point.
If Auto gain is on, gain will be adjusted
to reflect the number of exposures actually recorded.
Note that shooting will end
automatically if:
• A two-button reset is performed (pg. 75)
• The camera is turned off
• The battery is exhausted
• Pictures are deleted
D
Multiple Exposure
Do not remove or replace the memory card while recording a multiple exposure.
Live view (pg. 43) can not be used to record multiple exposures.
The information listed in the playback photo information display (including date of recording
and camera orientation) is for the first shot in the multiple exposure.
A
Other Settings
While multiple exposure mode is in effect, memory cards can not be formatted, changes can
not be made to bracketing or to shooting menu options other than White balance, and the
Lock mirror up for cleaning and Image Dust Off ref photo options in the setup menu can
not used.