Filter
Top Products
66
h
Self-Timer Mode ($)
The self-timer can be used to reduce camera shake or for self-portraits.
1 Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a stable, level surface.
2 Select $ mode.
Press the I button and rotate the main command dial until $ is displayed in
the control panel.
3 Frame the photograph.
Frame the photograph.
Before taking a photograph with the flash in P, S, A, or M
modes (pg. 78), press the M button to raise the flash and wait for the M indicator
to be displayed in the viewfinder (pg. 70).
The timer will stop if the flash is
raised after the timer has started.
D
Cover the Viewfinder
After framing the photograph, remove the
viewfinder eyepiece cup and insert the
supplied DK-5 eyepiece cap as shown.
This
prevents light entering via the viewfinder
interfering with exposure.
I button
Main command dial Control panel
DK-5 eyepiece cap