Filter
Top Products
191
L
e3: Modeling Flash
If On is selected when the camera is being used with the built-in flash or an optional
SB-900, SB-800, SB-600, or SB-R200 flash unit, a modeling flash will be emitted when
the camera depth-of-field preview button is pressed (pg. 82).
The default setting is
Off.
This option is available in P, S, A, and M modes only.
e4: Auto Bracketing Set
Choose the setting or settings bracketed when auto bracketing is in effect (P, S, A, and
M modes only).
Choose AE & flash (j; the default setting) to perform both exposure
and flash-level bracketing (pg. 92), AE only (k) to bracket only exposure, Flash only
(l) to perform only flash-level bracketing, WB bracketing (m) to perform white-
balance bracketing (see below), or ADL bracketing to take one picture with Active
D-Lighting on and another with Active D-Lighting off (pg. 193).
❚❚White Balance Bracketing
1 Select white balance bracketing.
Choose WB bracketing for Custom Setting e4 (Auto
bracketing set).
Note that white balance bracketing is not
available at image quality settings of NEF (RAW) or
NEF (RAW) + JPEG.
2 Choose the number of shots.
Pressing the D button, rotate the main command dial to choose the number of
shots in the bracketing sequence.
The number of shots is shown in the control
panel.
At settings other than zero, a W icon and bracketing progress indicator
appear in the control panel.
Number of shots
Bracketing
progress
indicator
D button Main command dial
Control panel
Viewfinder