Filter
Top Products
67
h
4 Start the timer.
Press the shutter-release button halfway to
focus, and then press the button the rest of the
way down to start the self-timer.
The self-timer
lamp will start to blink and a beep will begin to sound.
Two seconds before the
photograph is taken, the self-timer lamp will stop blinking and the beeping will
become more rapid.
At default settings, the shutter will be released ten
seconds after the timer starts.
The timer will not start if the camera is unable to focus or in other situations in
which the shutter can not be released.
The self-timer can be cancelled by selecting another release mode.
Turning the
camera off cancels self-timer mode and restores single frame or continuous mode.
D
Bulb
In self-timer mode, a shutter speed of A is equivalent to approximately
1
/10 s.
A
See Also
For information on changing the timer duration and choosing the number of shots taken, see
Custom Setting c3 (Self-timer, pg. 179).
For information on setting a beep to sound as the
timer counts down, see Custom Setting d1 (Beep, pg. 180).