Reference Section
E26
B Notes About Movie Editing
• Use a sufficiently charged battery to prevent the camera from turning off during
editing. When the battery level indicator is B, movie editing is not possible.
• A movie that was created by editing cannot be trimmed again.
• The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be extracted and saved as a still
image.
• Pause a movie and display the frame to be
extracted (A98).
• Use the multi selector JK to select the
H control and press the k button.
• Select Yes when a confirmation dialog is
displayed, and press the k button to save the
image.
• The still image is saved with Normal as the
image quality. The image size is determined by
the type (image size) (E30) of the original
movie.
For example, a still image saved from a movie
recorded with d 1080P/30p (or o 1080P/25p) is i (1920 × 1080
pixels).
7m427m42s7m42s
No
Yes
Copy this frame as a still image?