Filter
Top Products
47
Shooting Features
* Use of a tripod is recommended during Zoom exposure or Defocus during
exposure. Vibration reduction will not function even if Vibration reduction
in the setup menu is set to On.
• The focus area for autofocus differs depending on the setting of AF area
mode (A58, 73).
• When AF area mode is set to Auto (default setting), the camera
automatically selects one or more of the 9 focus areas containing the
subject closest to the camera. When the subject is in focus, the focus areas
that are in focus glow green.
Defocus during
exposure*
Creates images with a soft blur by varying focus slightly
until the shutter closes.
• The effect can be produced only when the shooting
mode icon on the shooting screen is green.
• When a shutter speed that is slow enough for defocus
during exposure cannot be obtained due to too bright a
subject, etc., the shooting mode icon does not turn
green, and the effect will not be produced.
• The desired effect may not be produced depending on
shooting conditions such as the distance to the subject.
Cross process
Creates images with an unusual hue by converting a
positive color image into negative or negative color image
into positive.
• Rotate the main command dial to select hue.
Soft
Softens the image by adding a slight blur to the entire
image.
Nostalgic sepia
Adds a sepia tone and reduces the contrast to simulate the
qualities of an old photograph.
High key Gives the entire image a bright tone.
Low key Gives the entire image a dark tone.
Selective color
Creates a black and white image in which only the
specified color remains.
• Rotate the main
command dial to
select the color to be
retained from the
slider.
• Press the k button
to hide the slider and
cancel color
selection. To display
the slider again, press
the k button again.
1/250
1/250
1/250 F5.6
F5.6
F5.6
Save
Save
Save
Slider