Filter
Top Products
Reference Section
E75
Monitor Settings
Press the d button M z tab (A13) M Monitor settings
Option Description
Image review
On (default setting): The captured image is displayed in the
monitor immediately after shooting and the monitor display
returns to the shooting screen.
Off: The captured image is not displayed immediately after
shooting.
Tone level information: Tone level information (A11) is
displayed in the monitor immediately after shooting.
Brightness
Set the monitor brightness to one of 6 levels.
• Default setting: 3
• u is suitable when very bright light under the open sky
makes the monitor difficult to see. Colors may appear
different from the actual image.
• Cannot be set when the viewfinder is used.
Photo info
Set the display options displayed in the monitor (A11)
during shooting. The following display options can be set for
each of Show info and Hide info.
X Virtual horizon: Displays the virtual horizon for checking
whether the camera is horizontal. When the camera is
horizontal or vertical, the mark on the virtual horizon display
turns green.
Y Histograms: Displays a graph that shows the brightness
distribution in the image (A16).
Z Framing grid: Displays a boxed guide for framing.
• Default setting: All hidden (off)
• To select show or hide, select an option with the multi
selector, and then press the k button to turn the check
box on w or off.
• After finishing the setting, select Confirm and press the k
button.
Virtual horizon
display
Select Circle (default setting) or Bars when the virtual horizon
is set to be displayed in Photo info (A16).
Playback/menus
Select which of the monitor and viewfinder is used to display
the playback screen or menu screen when the c button or
d button is pressed during shooting.
Monitor priority: Switches to the monitor when the
viewfinder has been used for shooting.
Monitor or viewfinder (default setting): Either the monitor
or viewfinder which had been selected before the c button
or d
button was pressed is continuously used.