Filter
Top Products
Reference Section
E54
Flash Exp. Comp.
Adjust the flash output.
Use this option when the flash is too bright or too dark.
B Notes About Flash Exp. Comp.
When flash exposure compensation has been set on the optional flash unit the
compensation values on the camera and the Speedlight are added.
Noise Reduction Filter
Set the strength of the noise reduction function that is normally performed
when saving images.
Rotate the mode dial to A
,
B
,
C, D, E, F or N M d button M A
,
B
,
C
or
D tab (A13) M Flash exp. comp.
Option Description
+0.3 to +2.0
The flash output is increased from +0.3 to +2.0 EV, in
increments of 1/3 EV, to make the main subject of the frame
appear brighter.
0.0 (default setting) The flash output is not adjusted.
-0.3 to -2.0
The flash output is reduced from –0.3 to –2.0 EV, in
increments of 1/3 EV, to prevent unwanted highlights or
reflections.
Rotate the mode dial to A
,
B
,
C, D, E, F or N M d button M A
,
B
,
C
or
D tab (A
13
) M
Noise reduction filter
Option Description
e
High
Performs noise reduction at a level higher than the
standard strength.
M
Normal
(default setting)
Performs noise reduction at the standard strength.
l Low
Performs noise reduction at a level lower than the
standard strength.