Filter
Top Products
27
The Basics of Shooting and Playback
C The Auto Off Function
• The time that elapses before the camera enters standby mode is about 1 minute.
The time can be changed using the Auto off setting in the setup menu (A99).
• While the camera is in standby mode, the monitor turns back on if you perform any
of the following operations:
- Press the power switch, shutter-release button, or c button.
- Rotate the mode dial.
- Open or close the monitor.
C Monitor Display
Press the w2 button to switch between showing and hiding the photo information
or shooting information that is displayed in the monitor (A11).
1/250
1/250
1/250
1280
1280
F5.6
F5.6
F5.6
1280
Flashes
No operations
performed
3 min
Camera turns off.Camera enters
standby mode.
No operations
performed