Filter
Top Products
Technical Notes and Index
F9
Monitor is hard
to see.
• The ambient light is too bright. Move to a darker
place or use the viewfinder.
• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.
10
99,
E75
F6
Image in the
viewfinder is
difficult to see.
Adjust the viewfinder using the diopter adjustment
control.
10
Date and time of
recording are
not correct.
• If the camera clock has not been set, the “Date not
set” indicator flashes during shooting and movie
recording. Images and movies saved before the clock
is set are dated “00/00/0000 00:00” or “01/01/2013
00:00” respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
28, 99,
E73
99,
E73
No information
displayed in
monitor.
Shooting and photo information may be hidden. After
confirming that the Fn2 button setting is set to Show/
hide info, press the w2 button until information is
displayed.
11, 101,
E92
Print date not
available.
Time zone and date has not been set in the setup
menu.
28, 99,
E73
Date not
imprinted on
images even
when Print
date is enabled.
• The current shooting mode does not support Print
date.
• A function that restricts the print date is enabled.
• The date cannot be imprinted on movies.
99,
E77
77
–
Screen for
setting time
zone and date is
displayed when
camera is turned
on.
The clock battery is exhausted; all settings were
restored to their default values.
28, 29
Camera settings
reset.
Problem Cause/Solution
A