Filter
Top Products
Reference Section
E37
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
• Up to 3 measured values can be saved: PRE1, PRE2 and PRE3.
1 Place a white or gray reference object under the lighting
that will be used during shooting.
2 Use the multi selector JK to
select PRE1, PRE2 or PRE3.
• Items can also be selected by rotating the
main command dial.
3 Use I to select Preset manual
and JK to select PRE.
• The lens extends to the zoom position for
measurement.
• To apply the last measured value, select f.
4 Frame the white or gray reference
object in the measuring window,
and press the k button to
measure the value.
• The shutter is released and measurement is
complete. No image is saved.
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto (normal), Auto (warm lighting) or
Flash.
Preset manual 1
Fine-tune
Fine-tune
Preset manual
Preset manual
Fine-tune
Preset manual
White balance
White balance
White balance
Cancel
Fine-tune
Fine-tune
White balance
White balance
Fine-tune
Preset manual
Preset manual
Preset manual
White balance
Measure
Measuring window