Filter
Top Products
Reference Section
E108
With this camera, various functions are available in combination with the
Speedlight (external flash unit) supported by the Nikon Creative Lighting
System (CLS) (E109). Use the Speedlight when the built-in flash cannot
provide sufficient lighting.
The following Speedlights and wireless Speedlight commander can be used for
the camera.
* Speedlight used for remote flash. Attachment Ring SX-1 cannot be mounted on
this camera. To use the SB-R200, it must be attached to the Speedlight Stand AS-20.
How to Attach the Speedlight/Wireless Speedlight
Commander
• Do not raise the built-in flash.
• Remove the accessory shoe cover from
the camera.
• Refer to the documentation provided
with your Speedlight/wireless
Speedlight commander for more
information on how to attach and
detach the Speedlight with a locking
pin and other details.
• Attach the accessory shoe cover when
the accessory shoe is not in use.
• Attempting to attach an accessory that
does not support this camera may
damage the camera and the accessory.
B Use Only Nikon Flash Accessories
Use only Nikon Speedlights. Flash units of other manufacturers (with voltages over
250 V applied to the camera's X sync contact, or causing short circuit at the accessory
shoe contact) could not only prevent normal operation, but damage the sync
circuitry of the camera or flash.
Speedlights (External Flash Unit)
Speedlights
SB-910, SB-900, SB-800, SB-700, SB-600,
SB-400, SB-R200*
Wireless Speedlight commander SU-800