Filter
Top Products
Technical Notes and Index
F11
Camera cannot
focus.
• The subject is too close. Try shooting using the
Scene auto selector or Close-up scene mode, or
the close range only/macro close-up focus mode.
• Incorrect focus mode setting. Check or change the
setting.
• The subject is hard to focus on.
• Set AF assist in the setup menu to Auto.
• Subject is not in focus area when the shutter-release
button is pressed halfway.
• The focus mode is set to E (manual focus).
• Turn the camera off and then on again.
40, 41,
64, 65
64, 65
84
99,
E80
34, 73
64, 66
26
Colored stripes
appear in the
monitor when
shooting.
Colored stripes may appear when shooting subjects
with repeating patterns (such as window blinds); this is
not a malfunction.
The colored stripes will not appear in captured images
or recorded movies. However, when using Continuous
H: 120 fps or HS 480/4×, the colored stripes may be
seen in the captured images and recorded movies.
–
Images are
blurred.
• Use the flash.
• Enable vibration reduction.
• Use D (Best Shot Selector) of Continuous in the
shooting menu.
• Use a tripod to stabilize the camera when shooting
(using the self-timer at the same time is more
effective).
59
99
73
62
Bright specks
appear in
images captured
with flash.
The flash is reflecting off particles in the air. Set the flash
mode setting to W (off).
59
Flash does not
fire.
• The flash mode is set to W (off).
• A shooting mode where the flash cannot fire is
selected.
• A function that restricts the flash is enabled.
• The built-in flash does not fire when an external flash
unit (optional) is used.
• When shooting using Advanced Wireless Lighting
photography, set the group setting to Group A.
Wh
en us
ing the built-in flash as the commander, set
the channel of the remote flash unit to 3 CH.
See the documentation provided with your
Speedlight (external flash unit).
59
67
77
E108
E108
Problem Cause/Solution
A