Filter
Top Products
Reference Section
E57
Zoom Memory
When the zoom control is moved while pressing the w1 button, the zoom
position (equivalent to focal length/angle of view in 35mm [135] format) is
switched to the positions that have been selected by setting the check box to
on in this menu option. The following settings are available: 28 mm, 35 mm,
50 mm, 85 mm, 105 mm, 135 mm and 200 mm.
• Select the focal length with the multi selector, and then press the k button
to set the check box to on w or off.
• The default setting is on w for all the check boxes.
• To finish the setting, press the multi selector K.
• The focal length set in the Startup zoom position is automatically set to
on w.
B Notes About Zoom Operation
• When more than one focal length has been set, move the zoom control while
pressing the w1 button to switch to the focal length closest to that before the
operation. To switch to a different focal length, release the zoom control and then
move it again.
• Release your finger from the w1 button when using digital zoom.
Startup Zoom Position
Set the zoom position (equivalent to focal length/angle of view in 35mm [135]
format) for when the camera is turned on.
The following settings are available: 28 mm (default setting), 35 mm, 50 mm,
85 mm, 105 mm, 135 mm and 200 mm.
Rotate the mode dial to A
,
B
,
C, D, E, F or N M d button M A,
B, C or D tab (A13) M Zoom memory
Rotate the mode dial to A
,
B
,
C, D, E, F or N M d button M A,
B, C or D tab (A13) M Startup zoom position