Filter
Top Products
Reference Section
E107
4 Aim the transmitter at the infrared
receiver on the front of the
camera (A1) and press the
transmission button.
• Press the transmission button from a
distance of 5m (16ft) or less.
• In the quick-response remote mode, once
the subject is in focus, the shutter is
released.
• When the time for self-timer is set to Z 10s
(10 seconds) or Z 2s (2 seconds), the self-timer lamp flashes when the
subject is in focus, and then about 1 second before the shutter is released,
the lamp stops flashing and remains lit. To stop the self-timer before an
image is taken, press the transmission button again.
• In the self-timer remote control mode, the remote control mode is set to Z
(quick-response remote) when the shutter is released.
Replacing the Battery for Remote Control ML-L3 (3V
CR2025 Lithium Battery)
• When changing the remote control battery, make sure that the battery’s positive
(+) and negative (–) terminals are oriented correctly.
• Make sure to read and follow the warnings of “For Your Safety” (Avii).
B Notes About the Remote Control
• The remote control may not function even from a distance of 5 m (16 ft) or less
when shooting in backlit conditions.
• The setting may not be changed when using certain settings of other functions.
C More Information
See “Self-timer: After Release“ (E78) for more information.