Filter
Top Products
104
VQT0X39
Troubleshooting (continued)
Problem Check points
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
The images are vertical.
≥ Have you selected video input on the TV?
>Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Is the [TVASPECT] setting correct?
>Change the setting to match the aspect ratio of the TV.
Press the menu button, then select [SETUP]>
[TV ASPECT]>[16:9] or [4:3].
Playback image is not
clear.
Sound breaks up or
noise affects the picture
and/or sound.
≥ Noise may interfere with the picture and/or sound when
the multi cable terminal becomes dirty. Wipe off any dirt
with a soft cloth, then connect to the multi-connector.
Images played back on
TV are cut.
≥ Depending on the TV connected, the sides of the images
being played may not appear. We recommend widening
the recording range of the objects you want to record
beforehand.
Recorded pictures are
not clear.
≥ Are you trying to record small or finely detailed objects
with [PICT.QUALITY] set at [ ]?
>If you try to record small or finely detailed objects with
[PICT.QUALITY] set at [ ], the images may break up
into a mosaic-like pattern. Record with [PICT.QUALITY]
set at [ ] instead. (P55)
A scene recorded on an
SD card cannot be
deleted.
≥ Is the scene locked?
>Locked scenes cannot be deleted. (P67)
≥ For the SD card, if its write protect switch is set to
[LOCK], then deletion is disabled. (P16)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed
by static or electromagnetic waves. Record important
data on a PC or other equipment as well. (P83)
During playback,
[UNPLAYABLE CARD.] is
displayed.
≥ Data with different formats or destroyed data is being
played back.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ Turn off the power to this unit. If the power cannot be
turned off, press the [RESET] button. You can also
remove the battery and then reinsert it or disconnect the
AC adaptor and then reconnect it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
VQT0X39ENG.book 104 ページ ２００６年６月１４日 水曜日 午前１０時５１分