Filter
Top Products
32
VQT0X39
Recording
First, format the SD card if one which has been used on another device is going to be
used for the first time on this unit. (P68) When the SD card is formatted, all of the
recorded data (files) is deleted. Once the data is deleted, it cannot be restored. Copy
valuable data onto a PC or other device before proceeding with the formatting.
We recommend using MotionSD STUDIO etc. to acquire data recorded on this unit.
(P76)
This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of
purchase. To watch images on normal TVs (4:3), change the wide mode setting before
recording (P43) or when playing back the images on the TV screen (P74).
∫ Basic camera holding
≥ Open the LCD monitor.
Recording cannot start when the LCD monitor
is closed. However, even if the LCD monitor is
closed during recording, the power does not
turn off until recording is ended.
≥ The angle of the LCD monitor can be adjusted
to suit what you want to record.
≥ We recommend attaching the hand strap 4
(supplied) to prevent the camera from
dropping.
≥ It is easier to hold this unit if you attach the
attachable grip 5 (supplied) to the tripod mount. (P11)
≥ Do not cover the white balance sensor 3 with your fingers, etc.
≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2
with your fingers.
Check before recording
Depending on the TV connected,
the sides of the images (the part
outside the dotted line) being
played may not appear. We
recommend widening the recording
range of the objects you want to
record beforehand.
1 16:9 screen
2 4:3 screen
12
16:9 4:3
3:42 PM
3:42 PM
DEC 15 2006
DEC 15 2006
3:42 PM
3:42 PM
DEC 15 2006
DEC 15 2006
1
2
5
4
3
VQT0X39ENG.book 32 ページ ２００６年６月１４日 水曜日 午前１０時５１分