Filter
Top Products
57
VQT0X39
Use the built-in flash in order to record still pictures in dark places.
¬ Rotate the mode dial to select .
1 Slide the [OPENß] flash lever.
The flash rises.
≥ The flash will flash when the record button is
pressed.
Setting the flash mode
Press the menu button, then use the
cursor button to select
[ ADVANCE]>[ß FLASH] and then
select the desired setting. (P27)
–[ß]: Forced flash
–[ßA]: Auto
≥ When [ßA] is set, the ambient brightness is
automatically detected, and only when the
flash is judged necessary will it flash.
When the flash is not used
Store the flash by pressing it with your fingers until it clicks back into place.
Red eye reduction function
Reduces the phenomena where human eyes become red from flashes.
Press the menu button, then use the
cursor button to select [ ADVANCE]>
[ RED EYE]>[ON]. (P27)
The [ ] indication appears.
≥ The flash is activated 2 times. Do not move
until the second flash is finished.
≥ Use this when you take pictures of people in
dark places.
≥ Red eye phenomenon may appear depending
on the recording conditions.
Built-in flash
OPEN
MENU
SETUP ENTER
EXIT
FLASH
RED EYE
REC LAMP
ADVANCE
FLASH LEVEL
1/2
O.I.S.
MENU
SETUP ENTER
EXIT
FLASH
RED EYE
REC LAMP
ADVANCE
FLASH LEVEL
1/2
OFF
ON
O.I.S.
VQT0X39ENG.book 57 ページ ２００６年６月１４日 水曜日 午前１０時５１分