Filter
Top Products
105
VQT0X39
Problem Check points
Even if an SD card is
formatted, it cannot be
used.
≥ Either this unit or the SD card may be damaged. Please
consult a dealer. Use an SD card from 8 MB to 4 GB with
this unit.
The scenes are not
correctly displayed in
thumbnails.
≥ Scenes displayed as
thumbnails in shades of blue
and white cannot be played
back or deleted. If the scenes
are unnecessary, format the
SD card to erase the data.
≥ Please be aware that if an SD card is formatted, then all
the data recorded on the card will be erased. Store
important data on a PC, etc. When saving scenes
recorded using this unit to a PC, you must use
MotionSD STUDIO etc. (P76)
“PUSH THE RESET
SWITCH.” is displayed.
≥ The unit has automatically
detected an error. To protect the
data, remove the SD card and then
press the [RESET] button with the
projecting part 1 of the hand
strap. This will restart the unit.
When you press the [RESET]
button, the date and time setting
will also be reset. Set the date and time again.
≥ Even after you press the [RESET] button, the indication
may still appear repeatedly. If so, this unit needs repair.
Detach the power connected, and consult the dealer
who you purchased this unit from. Do not attempt to
repair the appliance by yourself.
If the SD card is inserted
in another device, it is
not recognized.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/ SDHC Memory Card)
that you inserted. (P16)
>Refer to the operating instructions of the device for
details.
Even if connected by the
USB cable, this unit is
not recognized by the
PC.
≥ Have you installed the Web camera driver?
>Install the driver, then check the connections.
≥ Have you set this unit to the correct mode?
>The unit is not recognized if it is set to motion picture
playback mode. (P83)
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (P78, 79)
≥ Turn on the power to this unit.
When the USB cable is
disconnected, an error
message will appear on
PC.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on
the screen.
SETUP PLAY
1/3
1/3
1/3
1
VQT0X39ENG.book 105 ページ ２００６年６月１４日 水曜日 午前１０時５１分