Filter
Top Products
Connecting to other equipment
100
VQT0W82
• Do not use any other USB connection
cables except the supplied one.
• Do not disconnect the USB connection
cable while [ACCESS] is displayed.
• If battery power is exhausted while the
camera and the PC are communicating,
the recorded data may be damaged. Use
a battery with sufficient battery power
(P19) or the AC adaptor.
• If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator blinks
and the alarm beeps. In this case, stop
the communication at once on the PC.
• When connecting the camera to a
“Windows 2000” OS PC with the USB
connection cable, do not replace the
card while the camera and the PC are
connected. The information on the card
may be damaged. Disconnect the USB
connection cable before replacing the
card.
• Be careful about the following when
connecting the camera to a USB 2.0 (High
Speed) compatible PC.
– Operation is not guaranteed if you are
connecting 2 or more USB products to a
PC or connecting the camera with a
USB Hub or a USB extension cable.
– The camera may not operate normally if
connected to the USB terminal on the
keyboard.
• Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P44), multi playback (P48) and calendar
playback (P49).
• For information about this, refer to the
separate operating instructions for PC
connection.
• Read the operating instructions for the
PC.
Printing the Pictures
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to print and start printing on the
camera’s screen.
Set print settings such as the print quality
on the printer beforehand. (Read the printer
operating instructions.)
A: USB connection cable (supplied)
B: AC adaptor (supplied)
• It may take time to print the pictures so
use a battery with sufficient battery power
(P19) or the AC Adaptor when you
connect to a printer.
• Turn the camera off and then insert or
remove the cable for the AC Adaptor.
V OUT /
REMOTE
USB
B
A
C