Filter
Top Products
Advanced
58
VQT0W82
Taking Pictures using
the Built-in Flash
∫ Open the flash
Press the [ OPEN] button A.
• If you press the [ OPEN] button lightly,
the flash will open to the bounce flash
position B. If you press the [ OPEN]
button fully, the flash will open to the
normal flash position C.
• Use the flash in the normal flash position
when taking pictures with the flash normally.
∫ Close the flash
1: Press the flash down until it locks into
the bounce flash position.
2: Close the flash firmly.
• This camera is compatible with bounce
flash so the flash opens and closes in two
steps.
Refer to P62 for information about the
bounce flash.
• Be sure to close the flash when not in use.
∫ Switching to the appropriate flash
setting
Set the flash to match the recording.
1 Press [ ] D.
E: Viewfinder Display
F: When taking pictures with Live View
2 Rotate the command dial G and
select the flash setting.
• Refer to “Available flash setting by
recording mode” on P59 for information
about the flash settings for the built-in
flash that can be selected.
• Refer to P83 for setting the 1st and 2nd
curtain.
C
B
A
F
STANDARD
STANDARD
ISO
ISO
100
100
AUTO
AUTO
WB
WB
19
19
SINGLE
SINGLE
NORMAL
NORMAL
CUSTOM
CUSTOM
P
ISO
ISO
100
100
P
STD
STD
19
19
E
AUTO
D
STANDARD
STANDARD
ISO
ISO
100
100
AUTO
AUTO
WB
WB
19
19
SINGLE
SINGLE
NORMAL
NORMAL
CUSTOM
CUSTOM
P
G