Panasonic VQT0W82 Digital Camera User Manual


 
Before Use
4
VQT0W82
-If you see this symbol-
Care of the camera
Do not strongly shake or bump the
camera. The camera may stop operating
normally, pictures may not be recorded or
the lens may be damaged.
Sand or dust may cause the camera to
malfunction. Make sure that sand or
dust does not get into the lens or the
terminals when using the camera on a
beach etc.
Make sure that water does not get into the
camera when using it on a rainy day or on
a beach.
This unit is not waterproof. If rain water
or other drops of water splash onto the
camera, wipe it with a dry cloth.
Do not put your hands inside the
mirror. Do not press, push or use a
blower brush to forcefully blow air on the
shutter curtains as they are very thin. Be
careful as they may get scratched, bent or
damaged.
About the LCD monitor
Do not press the LCD monitor with
excessive force as it may cause the
camera to malfunction.
Condensation may form on the LCD
monitor in places with large temperature
differences. Wipe the condensation with a
soft, dry cloth.
If the camera is cold when you turn it on,
the picture on the LCD monitor will be
slightly darker than usual at first. However,
the picture will return to normal brightness
when the internal temperature of the
camera increases.
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer
and ask for the correct method of
disposal.
Extremely high precision technology is
employed to produce the LCD monitor.
However there may be some dark or
bright spots (red, blue or green) on the
screen. This is not a malfunction. The
LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on
pictures on a card.