Filter
Top Products
Basic
41
VQT0W82
• The exposure compensation value is
displayed on the LCD monitor when
taking pictures with Live View. Refer to
P50 for information about Live View.
3 Press the shutter button halfway
to set the selected exposure.
• You can also set the selected exposure
by doing the following:
– Pressing [FUNC.2]
– Not operating the camera for a few
seconds
∫ If you are using the command dial
only to compensate the exposure
If you set [DIREC. EX. COMP.] to [ON], you
can compensate the exposure by rotating
the command dial only and do not have to
press [FUNC.2]. (It is set to [OFF] at the
time of purchase.)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [CUSTOM]
menu icon [ ] and then press 1.
3 Press 3/4 to select
[DIREC. EX. COMP.] and then
press 1.
4 Press 4 to select [ON] and then
press [MENU/SET].
5 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
• After performing steps 1 to 5, rotate
the command dial to compensate the
exposure.
• EV is an abbreviation of “Exposure Value”.
It refers to the amount of light given to the
CCD by the aperture value and the shutter
speed.
• The set exposure value is memorized
even if the camera is turned off.
• The compensation range of the exposure
will be limited depending on the
brightness of the subject.
• Rotate the command dial slowly but
surely.
• You cannot compensate the exposure in
manual exposure mode.
• Refer to P73 for information about setting
a different function to [FUNC.2].
1
/
3
OFF
SET
MENU
MENU
SELECT
EXIT
REC
FILM MODE
PICT.SIZE
QUALITY
RAW REC.
ASPECT
1
/
4
EXIT
MENU
SELECT
CUSTOM
CUSTOM SET
CUST. SET MEM.
OFF
NORMAL
DIREC. EX. COMP.
FUNC.2 SET
FUNC.1 SET
1
/
4
EXIT
MENU
SELECT
CUSTOM
CUSTOM SET
CUST. SET MEM.
OFF
NORMAL
DIREC. EX. COMP.
FUNC.2 SET
FUNC.1 SET
SET
MENU
1
/
4
SET
MENU
SELECT
CUSTOM
CUSTOM SET
CUST. SET MEM.
FUNC.2 SET
NORMAL
OFF
FUNC.1 SET
DIREC. EX. COMP.
ON