Filter
Top Products
Basic
36
VQT0W82
Aperture-priority AE
[]
Set the aperture value to a higher number
when you want a sharp focus background.
Set the aperture value to a lower number
when you want a soft focus background.
1 Rotate the shutter speed dial to
[A].
2 Rotate the aperture ring to set the
aperture value.
A: [2.8] to [22]
• When changing from [A], rotate the
aperture ring while pressing the
aperture ring button B.
• The mode becomes Aperture-priority
AE mode [ ].
3 Take a picture.
• If you press the shutter button halfway
when the exposure is not adequate, the
aperture value and the shutter speed turn
red. The aperture value and the shutter
speed blink on the Viewfinder. (They do
not blink when the flash is activated.)
• When most of the subject is bright, such
as during fine weather or snow, the
recorded pictures may become dark. In
these cases, compensate the exposure
towards positive. (P40)
• The ISO sensitivity cannot be set to
[AUTO]. (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] to Aperture-priority
AE.)
• When you use a lens with no aperture
ring, press [FUNC.1] and then rotate the
command dial to set the aperture.
Shutter-priority AE
[]
When you want to take a sharp picture of a
fast moving subject, set with a faster
shutter speed. When you want to create a
trail effect, set to a slower shutter speed.
1 Rotate the aperture ring to [A]
while pressing the aperture ring
button A.
250
125
60
30
15
8
4
/
B
2-60s
1
000
-
500
A
4
0
0
0
A
B
A
A
A
STANDARD
STANDARD
ISO
ISO
100
100
AUTO
AUTO
WB
WB
19
19
SINGLE
SINGLE
NORMAL
NORMAL
CUSTOM
CUSTOM
-
1 +1
+1
0
-
2 +2
+2
F22
22
A
A