Filter
Top Products
Advanced
57
VQT0W82
• The MF assist disappears in the following
cases.
– About 10 seconds after you stop
pressing 3/4/2/1 or rotating the focus
ring or the command dial
– When the shutter button is pressed
halfway
• The MF assist returns to the center of the
screen when the camera is turned off and
then on again.
• You cannot use MF assist when using the
digital zoom.
Checking the Depth of
Field
You can check the depth of field (effective
focus range) before taking a picture by closing
the leaf shutter to the aperture value you set.
Press [ ] A (aperture stopping
down button).
• While you are pressing [ ] (aperture
stopping down button), the brightness
of the screen is automatically adjusted
and you can check the depth of field
without the screen becoming dark when
the leaf shutter closes.
∫ Depth of field properties
¢1 Recording conditions
¢2 Example: When you want to take a
picture with a blurred background etc.
¢3 Example: When you want to take a
picture with everything in focus
including the background etc.
• The screen may become dark depending
on the subject, settings on the camera etc.
• [ ] (aperture stopping down button) is
not activated when taking pictures with the
Viewfinder.
¢1
Aperture
value
Small Large
Focus
length of
the lens
Tele Wide
Distance to
the subject
Near Distant
Depth of field
(effective focus
range)
Shallow
(Narrow)
¢2
Deep
(Wide)
¢3
A