Filter
Top Products
Menu Settings
97
VQT0W82
3 Press 2/1 to determine the
horizontal position and then
press the shutter button to set.
• Use 3/4 to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect ratio
is newly created when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• Files that do not conform to the DCF
standard cannot be converted. DCF is an
abbreviation of “Design rule for Camera
File system”, stipulated by JEITA “Japan
Electronics and Information Technology
Industries Association”.
• You may not be able to convert pictures
taken on other equipment.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P88)
It is not usually necessary to format a card.
Format it when the message [MEMORY
CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a sufficiently charged battery (P19) or
the AC adaptor when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write-protect switch C is set to [LOCK].
• If the card cannot be formatted, consult
the customer call centers below.
SET : SHUTTER
ADJUST
EXIT
MENU
SET
MENU
NO
YES
DELETE ORIGINAL
PICTURE?
ASPECT CONV.
MENU
SETSELECTCANCEL
[FORMAT]
Initializing the card
SET
MENU
FORMAT
SELECT
SET
MENU
DELETE ALL DATA
ON THE MEMORY CARD?
SET
MENU
NO
YES
2
C
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca