Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 768
CP_REGARD_TO_INCOMING_S
ETUP_RATE
For use in the Avaya Environment.
If set to YES, the RealPresence Collaboration Server calculates the
line rate for incoming calls in CP conferences, according to the line rate
which is declared by the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to the conference line rate
regardless of the rate in the H.225 setup message.
Default: YES.
CPU_BONDING_LINK_MONITO
RING_FREQUENCY
Used when using the MII Monitor for troubleshooting networks.This
flag sets the MII Polling Interval in milliseconds. A value of zero
disables MII monitoring.
Default: 100
CPU_BONDING_MODE Sets the Bonding Mode of the Signalling and Management network
interface controllers.
Mode=6, balance-alb,
(Adaptive Load Balancing) includes balance-tlb, (Transmit Load
Balancing) and balance-rlb (Receive Load Balancing) for IPV4 traffic.
No special switch support is required.
Receive Load Balancing is achieved by ARP negotiation.
Outbound ARP Replies are intercepted and their source hardware
address is overwritten with the unique hardware address of one of the
slaves in the bond. In this way different peers will use different
hardware addresses for the server.
Note: balance-alb is the only supported value. All other possible values
are for troubleshooting purposes only.
Default: balance-alb
Possible values:
• balance-alb
• balance-rr
• active-backup
• balance-xor
• broadcast
• 802.3ad
• balance-tlb
DETECT_SIP_EP_DISCONNEC
T _TIMER
The flag value indicates the amount of time in seconds to wait for an
RTCP or RTP message to be received from the endpoint. When the
time that was set in the system flag has elapsed and no RTCP or RTP
audio or video message has been received on either the audio or the
video channel, the MCU disconnects the SIP endpoint from the
conference.
Default: 20 (seconds)
Range: 0 - 300
For more information see Detecting SIP Endpoint Disconnection.
Manually Added, Modified, Deleted System Flags
Flag Description