Filter
Top Products
Connect an antenna, cable TV coaxial cable, or cable box with coaxial cable.
Connect to a television VHF/UHF jack with coaxial cable.
Connect to a cable box or satellite receiver that has S-Video Out. The Audio/Video IN 2 connectors must be
used with S-Video to receive sound.
Connect to a television, monitor or A/V receiver that has S-Video In.
Connect to the Audio/Video outputs of a cable box or satellite receiver using standard audio/
video cables.
Connect to the Audio/Video inputs of a television, monitor or A/V receiver using stan-
dard audio/video cables.
Connect to a broadband home network, including a router, hub or switch.
Connect to a television or monitor equipped with a VGA input connector.
Connect to an audio/video receiver equipped with an optical input.
Connect and affix the IR emitter over the infrared detector on a cable box or satellite receiver. This allows
ReplayTV to change the channels on these devices.
Connect to a satellite receiver that has a Serial port. This allows ReplayTV to change the channels on
the satellite receiver. The IR Blaster is not needed if the satellite receiver has Serial Out.
Connect directly to a wall jack.
Connect to an electrical outlet.