Filter
Top Products
Chapter 2 Fitting and Connections
34 Chapter 2 Fitting and Connections
VF connector
Retaining catch
Viewfinder left-to-right
position fixing ring
Viewfinder front-to-back
position locking knob
Viewfinder left-to-right
position fixing ring
Using Accessories
Using the Viewfinder
Removing the viewfinder
1 Pull the viewfinder plug out of
the VF connector on the front.
2 Loosen the viewfinder left-to-
right position fixing ring, then
pulling up the retaining catch,
slide the viewfinder out.
To fit the viewfinder
Reverse the removal procedure. (You need not hold
the retaining catch up.)
Left eye adaptor
By fitting a left eye adaptor, you can use the
camcorder with your left eye to the viewfinder.
Note
You cannot stow the camcorder with a left eye adaptor
attached in the carrying case.
For details, consult your Sony dealer.
Adjusting the viewfinder position
To adjust the viewfinder left-to-right position, loosen
the viewfinder left-to-right fixing ring, and to adjust
the front-to-back position loosen the viewfinder front-
to-back position locking knob.