Filter
Top Products
Chapter 3 Shooting 49
Chapter 3 Shooting
Basic Procedure for Shooting
Note
Noise may appear in the EZ mode if the FILTER
control is set to 2 or 4, and iris is set to fully open. In
such case: when the FILTER control is set to 4, set it
to 2; when set to 2, set it to 3.
3 Check the switch settings on the camcorder. (See
pages 12 to 26).
If there is not sufficient time to check the
camcorder settings, you can use “easy mode” by
setting the EZ MODE button ON. The camcorder
is automatically adjusted to standard settings, and
the iris and the white balance are adjusted
automatically. (See page 91.)
4 Check the settings in the basic menu (page 80) and
advanced menu. (page 86.)
5 Check the lens settings (pages 32 and 33) and
flange focal length adjustment. (page 119.)
6 Adjust the eyepiece focus, and the contrast and
brightness of the viewfinder image. (page 118.)
FILTER control
Focusing ring
VTR button
RET button
POWER switch
ZEBRA button
VTRET40.0.2corder se2.89 -12. 1 Tstmen1 118.)