Filter
Top Products
92 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Advanced menu page 9 Advanced menu pages 10 to 13
These pages are displayed only when the SETUP
switch has been to FILE.
For details of this operation, see “Setup Files” (page 94).
Advanced menu pages 14 and 15
These pages are displayed only when the SETUP
switch has been to FILE.
For details of this operation, see “Using SetupNavi and
SetupLog” (page 99).
Item Settings
16:9/4:3
Selects whether to put
the camera in 16:9
mode or 4:3 mode.
16:9 (normal value)
4:3
a)
WIDE ID
Selects whether or not
to add a wide aspect ID
signal to video output
signals in 16:9 mode.
ON (normal value): Adds.
OFF: Does not add.
VF SCAN
Selects 16:9 or 4:3 as
the viewfinder scan size
when using the supplied
DXF-701WS/701WSCE
Viewfinder.
AUTO (normal value):
Automatically switch to 16:9 size
when the camera is in 16:9
mode, and automatically switch
to 4:3 size when the camera is in
4:3 mode.
a)
FULL: Regardless of camera’s
mode (16:9
b)
or 4:3), the
viewfinder picture completely fills
the display area.
Viewfinder Advanced Menu
a) Compared to 16:9 mode, the 4:3 mode video appears as
if a zoom lens has been adjusted slightly toward the
telephoto end (see figure on next page).
b) When the camera is in 16:9 mode, the viewfinder picture
appears stretched vertically (see figure on next page).
MENU MODE
Selects whether or not
switch the mode (16:9/
4:3) on the basic menu.
1 (normal value): Selects the
16:9 or 4:3 mode only with the
advanced menu.
2: Selects the 16:9 or 4:3 mode
with both the basic and advanced
menus.
PAGE9 (NEXT
m
$
PREV
m
4
)
m
16:9/4:3 : 16:9
WIDE ID : ON
VF SCAN : AUTO
MENU MODE: 1
EXIT MENU (YES
m
PUSH)