Filter
Top Products
140
Adjustments and Settings from Menus
Chapter 5 Menu Displays and Detailed Settings
To cancel changing the shot ID
Before executing step 5 of “Setting the Shot ID” on page
139, move b to ESC, and press the MENU knob.
Showing the Status Display
You can confirm the settings or status of the camcorder on
the screen by showing the status display.
Items shown in the status display
The status display allows you to confirm the following
items related to the camera setting.
• FORMAT: Video recording format set on this unit
• WHITE: White balance color temperature
• ASSIGN: The setting of ASSIGN switch (1 to 4)
• TIME CODE: DF or NDF
• COMPONENT OUT: Output from the VIDEO OUT
connector
• AUDIO: Audio recording format set on this unit
• F.MIC: Front microphone setting
• CH1 to CH4: Knob adjustment for each audio channel
To show the status display
Flick the MENU switch to STATUS when the menu is not
displayed.
Adjustments and
Settings from Menus
Setting Gain Values for the GAIN
Switch Positions
You can set the gain values for the L, M, and H positions
of the GAIN switch, which switches the gain of the video
amplifier.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the GAIN SW page of the OPERATION
menu, and press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 131.
You can set the following items on the GAIN SW
page.
2
Select the item corresponding to the switch position,
and press the MENU knob.
3
Turn the MENU knob to select the gain value, and
press the MENU knob.
You can select from –3, 0, 3, 6, 9, 12, 18, 24, 30, 36,
42, and 48 dB.
To change the gain corresponding to another switch
position, repeat steps 2 and 3.
Selecting the Output Signals
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
F330
FORMAT : HD 50I SP
WHITE : 3200K
ASSIGN <1>EZMOD <2>IRRCN
<3> OFF <4> OFF
TIME CODE : DF
COMPONENT OUT:HD YPbPr
AUDIO : 16bit 4ch
F,MIC : STEREO
CH1: FRONT CH2: REAR
CH3: FRONT CH4: FRONT
MENU
ON OFF
STATUS
The status display appears when
the MENU switch is flicked to
STATUS, and disappears when
the switch is released.
Item Description
GAIN LOW Sets the gain value corresponding
to the L position of the GAIN
switch.
GAIN MID Sets the gain value corresponding
to the M position of the GAIN
switch.
GAIN HIGH Sets the gain value corresponding
to the H position of the GAIN
switch.
GAIN TURBO When assigning TURBO to the
ASSIGN switch, sets the gain
value corresponding to the
ASSIGN switch !"##$%&'#$DR(*.