Filter
Top Products
150
Saving and Loading Scene Files
Chapter 6 Saving and Loading the User Setting Data
Saving and Loading
Scene Files
You can save various settings for shooting a particular
scene as a scene file. Loading the scene file, you can
quickly recreate setup conditions suitable for the scene.
You can save up to five scene files in the camcorder
memory and up to 100 scene files in a “Memory Stick”.
You can also load data from the “Memory Stick” into the
camcorder memory.
Data that can be saved in a scene file
You can save the following data in a scene file:
• Values adjusted using the PAINT menu
• Shutter speed settings made in the standard mode and
ECS mode
For details of the PAINT menu, refer to “PAINT menu” on
page 118.
Saving a Scene File
To save a scene file to the “Memory Stick”, insert the
“Memory Stick” into the “Memory Stick” slot before
starting the operation.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the SCENE FILE page of the FILE menu, and
press the MENU knob.
For details on menu operation, see “Basic Menu
Operations” on page 131.
To set a file ID for the data to be saved
Set the file ID before going to step 2.
For details on setting the file ID, see “To set the file
ID” on page 148.
2
Select SCENE STORE, and press the MENU knob.
The SCENE STORE page appears.
FILE ERROR
(flashing)
The “Memory
Stick” contains
data that cannot be
loaded into this
camcorder.
Data saved to a
“Memory Stick”
using a camcorder
whose model is
not the same as
this camcorder
cannot be loaded
into this
camcorder.
Error message Cause Action
s
1 :STANDARD
s
2 :STANDARD
s
3 :STANDARD
s
4 :STANDARD
s
5 :STANDARD
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: STANDARD
TOP F04 SCENE FILE