Filter
Top Products
166
Operation Warnings
Appendix
1) Asterisks (*) are replaced by digits in the display.
2) During recording
3) During playback, fast forward, fast reverse, or stop
4) During recording pause
5) During recording or pause
For details about the warning displays and alarm
messages on the viewfinder, see the next item.
Operation/alarm messages
An operation or alarm message is displayed in the
operation/alarm message display area (see page 32) of the
viewfinder screen.
A message for VDR operation is displayed in the setting
change and adjustment progress message display area of
the viewfinder screen (see page 32).
High TEMP! – Internal
temperature
high.
Operation
continues.
Power the unit off
and move it to a
cool place.
ACC Sensor! – Internal drive
sensor error
Operation
continues.
Protect the unit
from shock and
vibrations, turn off
the power, and
contact your Sony
dealer.
Skew Sensor
Status
display on
the LCD
monitor/
viewfinder
screen
WARNING
indicator
Warning
sound
Indicators in
the viewfinder
Problem VDR operation Action to take
Warning
indication
: Continuous
: 1 flash/s
: 4 flashes/s
Continuous
beep
1 beep/s
4 beeps/s
REC/
TALLY
BATT
: Continuous
: 1 flash/s
: 4 flashes/s
Operation/alarm
message
Meaning
INTERVAL **M**S Indicates the camera is in the
Interval Rec mode. **M**S
indicates the shooting interval.
LOW LIGHT Appears, depending on the
setting, to indicate the subject
illumination is inadequate.
HIGH TEMPERATURE Indicates that temperatures have
risen inside the unit. Avoid
continued use in this state.
Message Meaning and action to take
ILL. Disc! The disc cannot be used by this
unit. Insert another Professional
Disc.
ILL. Index!
No FS!
Unknown FS!
Index file or file system error.
Exchange or format the disc.
No Support! A recorded clip cannot be handled
by this unit. Exchange or format
the disc.
FORMAT NG! The disc cannot be used by this
unit. Exchange the disc.
Disc Damage The disc cannot be recorded. To
record, exchange the disc.
Non AV Full
MAX # Files
The disc is full. Exchange or
format the disc.
DI read err
Read err
DRV ADJ err
The disc was not recognized. Try
ejecting the disc and inserting it
again. Or exchange the disc.
Run Salvage Salvage processing needs to be
done on the disc. To record on the
disc, eject the disc, insert it again,
and execute salvage processing.
Salvage NG Salvage processing failed. +,-$
.#/&01"2$"##$5]&7.107'$,N$P0"8"$
L3#7$F#8,-.07'$P,#"$U,/$\7.$
U,-9&11W$!C&1J&'#$+K78/0,7*:$,7$
%&'# )>.
REC INHI.! The Write Inhibit tab of the disc is
in the recording disabled position,
or salvage processing needs to be
done on the loaded disc. Set the
tab to the recording enabled
position. Or eject the disc, insert it
again, and perform salvage
processing.
Message Meaning and action to take