Filter
Top Products
167
Operation Warnings
Appendix
a) REC INHI.! appears if you attempt to start recording.
Alarm messages during thumbnail search,
scene selection, and clip list operations
Alarm messages may appear in the LCD monitor during
thumbnail search, scene selection, and clip list operations.
In this case, take the action indicated in the following table.
HD 50I/25P
HD 60I/30P
HD 23P Disc
525/60
625/50
2CH×16 Clip
4CH×16 Clip
The loaded disc has a different
recording format. Exchange the
disc, or change the recording
format.
Index File! There is an unsupported index file
on the disc to which you are trying
to record. Exchange or format the
disc.
File System There is an unsupported file
system on the disc to which you
are trying to record. Exchange or
format the disc.
KEY INHI.!
a)
Disc operations are not possible
when the DC IN connector is not
connected and the CA-755 is
being used.
ILL. PLAY! An A/V phase error occurred
during playback. Stop the disc.
Lid Closed! The lid of the disc compartment
does not open. Check the lid.
Lid Open! The lid of the disc compartment is
not closed. Close it securely.
No Clip! There are no clips recorded on the
disc. Exchange for a recorded
disc.
No Disc! There is no disc loaded. Insert a
disc and try the operation again.
STOP ONCE!
REC mode!
The operation is not possible while
the disc is being played or
recorded. Stop the disc.
Disc Top!
Disc End!
The operation is not possible
because the disc is at the top or
end.
Formatting! The disc is being automatically
formatted. Wait until the format
ends.
Recording The unit is writing to the file
system. Wait until writing finishes.
No EM Space
EM Full!
Essence marks cannot be
inserted. +,-$.#/&01"2$"##$
5F#8,-.07'$C3,/$[&-=":$,7$
%&'# AE;
SB CLP mode Press the SEL/SET button (four-
way arrow key) up to clear the
SUB CLIP indicator before
carrying out the operation.
No SEL List No clip list is selected. Create a
new clip list, or load a clip list from
the disc.
No List! There is no clip list. Create a clip
list.
No SUB Clip There are no sub clips in the clip
list. Register a sub clip, or load
another clip list.
Message Meaning and action to take
SUB Clip NG The In and Out point positions are
invalid. Set correct In and Out
points.
MAX# SB CLP The total number of sub clips is
over the upper limit (300).
CL OVER DUR The total duration of sub clips in
the current clip list is over the
upper limit (24 hours).
FAN Stopped!
DR-FAN Stop
The main unit or drive fan has
stopped. Avoid use under high
temperatures, turn off the power,
and contact your Sony dealer.
Message Meaning and action to take
CANNOT EXPAND
CLIP
ANY FURTHER.
The clip cannot be expanded into
more blocks.
This appears when the EXPAND
button is pressed when the
number of block is maximum, or
when the duration of an expanded
thumbnail is 1 frame.
SELECTED ESSENCE
MARK
DOES NOT EXIST.
The selected essence mark does
not exist.
This appears in the essence mark
selection screen when the
specified essence mark does not
exist on the disc.
SUB CLIP IS INVALID.
SET APPROPRIATE
IN/OUT POINTS.
The temporal relationship between
the specified In and Out points in a
TRIM operation !"##$%&'#$?A* is
not correct.
Reset so that the value of the Out
point timecode is larger than the
value of the In point timecode.
DURATION OF ONE
CLIP LIST MUST BE
LESS THAN 24
HOURS.,
The total duration of the current
clip list is greater than 24 hours.
This appears when the total
duration of the current clip list
exceeds the upper limit of 24
hours as the result of a sub clip
ADD$!"##$%&'#$?@* operation or a
TRIM operation !"##$%&'#$?A*.
NO MORE SUB CLIPS
CAN BE ADDED TO
THE CLIP LIST.
The upper limit of sub clips in the
current clip list has been
exceeded.
This appears when the total
duration of the current clip list
exceeds the upper limit of 24
hours as the result of a sub clip
ADD$!"##$%&'#$?@* operation or a
TRIM operation !"##$%&'#$?A*.
Message Meaning and action to take