109
Enjoying images on your computer
Viewing image fi les once
copied to a computer with
your camera
When an image fi le copied to a computer
no longer remains in a recording medium,
you can view that image again on your
camera by copying the image fi le in the
computer to a recording medium.
• Step is not necessary when the fi le name set
with your camera has not been changed.
• You may be unable to play back some images
depending on the image size.
• When an image fi le has been processed by a
computer or when the image fi le was recorded
using a model other than your camera,
playback on your camera is not guaranteed.
• When the overwrite confi rmation message
appears, enter a different number in step .
• When there is no folder, fi rst create a folder
with your camera and then copy the image fi le
(page 52).
Right-click the image fi le, then
click [Rename]. Change the
fi le name to “DSC0”.
Enter a number from 0001 to 9999 for
.
• An extension may be displayed depending on
the computer settings. The extension for still
images is JPG, and the extension for movies is
MPG. Do not change the extension.
Copy the image fi le to the
recording medium folder.
Right-click the image fi le, then
click [Copy].
Select and double-click the
[DCIM] folder from [Removable
Disk] or [Sony MemoryStick] in
[My Computer].
Right-click the [MSDCF]
folder in the [DCIM] folder and
click [Paste]. stands for any
number within the range from 100
to 999.
Installing “Picture Package”
and “ImageMixer VCD2”
“Picture Package” is only for
Windows computers.
You can use the “Picture Package”
software on your Windows computer to
compile the images shot with your camera.
When you install “Picture Package,” the
USB driver is also installed at the same
time.
• When the computer is in use, shut down all
application software before you install “Picture
Package.”
For computer environment
See page 102 for the basic Windows
operating environment. Other system
requirements are as follows.
Software: Macromedia Flash Player 6.0
or later, Windows Media Player 7.0 or
later, DirectX 9.0b or later
Sound card: 16-bit stereo sound card
with speakers
Memory: 64 MB or more (128 MB or
more is recommended.)
Hard Disk: Disk space required for
installation: approximately 500 MB
Display: Video card (Direct Draw driver
compliant) with 4 MB of VRAM