Filter
Top Products
14
4
To a wall outlet (wall socket)
Power cord
(mains lead)
Connect the power cord
(mains lead) to the AC Adaptor
and to a wall outlet (wall
socket).
The CHG / lamp lights up when charging
begins.
CHG
/
CHG/ lamp
The CHG/ lamp goes off when charging
is completed.
• After charging the battery pack, disconnect the
AC Adaptor both from the DC IN jack of the
camera and from a wall outlet (wall socket).
Battery remaining indicator
The battery remaining indicator on the
LCD screen shows the remaining shooting
or viewing time.
Remaining indicator
60min
Remaining time
• When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.
• The displayed remaining time may not
be correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC
Adaptor at a temperature of 25°C (77°F).
Battery pack Charging time (min.)
NP-FR1 (supplied) Approx. 180
• The charging time may become longer under
certain circumstances or conditions.
To remove the battery pack
Battery eject lever
Open the battery/“Memory Stick”/CF
card cover. Slide the battery eject lever in
the direction of the arrow, and remove the
battery pack.
• Be careful not to drop the battery pack when
removing it.