Filter
Top Products
131
Troubleshooting
Message Meaning/Corrective Action
Enable printer to connect
• [USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge compliant device.
Check the device.
• Depending on the circumstances, the connection may not be established. Disconnect and connect the USB cable
again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.
Connect to
device
• You tried to print images before the printer connection was established. Connect to a PictBridge compliant printer.
No printable image
• You tried to execute [DPOF image] without checking the
mark.
• You tried to execute [All In This Folder] while selecting the folder that stores only movies or images recorded in
RAW mode. You cannot print movies or image recorded in RAW mode.
Printer busy
• Since the printer is busy, it cannot receive print requests. Check the printer.
Paper error
• A paper error occurred, such as paper-out, paper-jam, etc. Check the printer.
Ink error
• An ink error has occurred in the connected printer, or the ink is low. Check the printer.
Printer error
• The camera received an error from the printer. Check the printer, or check if the image you want to print is
corrupted.
• The data transmission to the printer may not be completed yet. Do not disconnect the USB cable.
Processing
• The printer is performing the printing stop processing. Printing is not possible until this processing is completed.
This processing may take some time depending on the printer.