Filter
Top Products
13
Getting started
Charging the battery pack
1
2
1
Open the battery/“Memory
Stick”/CF card cover.
Slide the cover in the direction of the
arrow.
• Be sure to turn off your camera when
charging the battery pack (page 17).
• Your camera operates with the
“InfoLITHIUM” NP-FR1 battery pack (R
type) (supplied). You can use only R type
battery pack (page 146).
2
mark
Battery eject lever
Install the battery pack, then
close the battery/“Memory
Stick”/CF card cover.
Make sure the battery pack is fi rmly
inserted all the way, then close the cover.
Battery insertion slot
Insert the battery pack
so that tip of the
marks on the side of the
battery pack face the tip
of the mark on the
battery insertion slot.
• The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment toward the LCD screen.
3
DC IN jack cover
AC Adaptor
DC plug
Open the DC IN jack cover
and connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Connect the plug with the mark facing
left.
• Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
• Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.