Filter
Top Products
Quick Start Guide
11
Recording a still image on a “Memory Stick” (p. 122)
When you purchase your camcorder, the clock setting is
set to off. If you want to record the date and time on a
picture, set the clock setting before recording (p. 19).
Monitoring the still image on the LCD screen
(p. 148)
1Set the POWER switch to MEMORY
while pressing the small green button.
Make sure that the LOCK switch is set
to the right (unlock) position.
2Press PLAY. The last recorded
image is displayed.
NOTE
Do not pick up your
camcorder by the
viewfinder, the LCD panel,
the battery pack or the jack
cover.
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK
1Remove the lens cap.
3Press OPEN to open the LCD
panel. The picture appears on
the screen.
2Set the POWER switch to
MEMORY while pressing the
small green button.
Make sure that the LOCK
switch is set to the right
(unlock) position.
4Press PHOTO
lightly.
5Press PHOTO
deeper.
FN
INDEXPLAY
Viewfinder
When the LCD panel is closed, pull
out the viewfinder until it clicks.
Adjust the viewfinder lens to your
eyesight (p. 28).