Filter
Top Products
132
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
Recording a superimposed image to tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a “Memory Stick” recorded with still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In standby, press FN and select PAGE2.
(3) Press MEM MIX. The last image recorded on the “Memory Stick” appears on
the right lower part of the screen.
(4) Press –/+ on the right lower corner of the screen to select the still image which
you want to superimpose.
–: to see the previous image
+: to see the next image
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
OK to return to PAGE2.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.