Filter
Top Products
177
Viewing images with your computer
Notes
•The followings may occur while you are using your camcorder, and are not due to any
malfunction.
–The image shakes up and down.
–Some images are not displayed correctly due to noise, etc.
–Images of different color systems to that of your camcorder are not displayed
correctly.
•When your camcorder is in tape recording standby with a cassette inserted, it turns off
automatically after five minutes.
•We recommend setting DEMO MODE to OFF in the menu settings when your
camcorder is in tape recording standby without cassette.
•Indicators in the camcorder LCD screen do not appear on images that are captured
into your computer.
If image data cannot be transferred by the USB connection
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Reinstall the USB driver
following the procedure on page 171.
If any trouble occurs
Close all running applications, then restart your computer.
Carry out the following operations after quitting the application:
–Disconnect the USB cable.
–Change the POWER switch position to others or set it to OFF (CHARGE).
Seeing the on-line help (operating instructions) of “PIXELA
ImageMixer Ver.1.0 for Sony”
A “PIXELA ImageMixer Ver.1.0 for Sony” on-line help site is available where you can
find the detailed operating method of “PIXELA ImageMixer Ver.1.0 for Sony.”
(1) Click located in the upper-right corner of the screen.
The ImageMixer’s Manual screen appears.
(2) You can find the information you need from the list of contents.
To close on-line help
Click at the top right of the screen.
If you have any questions about “PIXELA ImageMixer Ver.1.0 for Sony”
“PIXELA ImageMixer Ver.1.0 for Sony” is the product of PIXELA corporation. For more
information, refer to the instruction manual of the CD-ROM supplied with your
camcorder.
Note on using your computer
Communications with your computer
Communications between your camcorder and your computer may not recover after
recovering from Suspend, Resume, or Sleep.
Viewing images recorded on a tape on your computer – For Windows users