Filter
Top Products
185
Customizing Your Camcorder
Changing the menu settings
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The LCD screen shows only the items you can operate at the moment.
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
PRINT SET
CM SET
TAPE SET
SETUP MENU
OTHERS
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
N.S. LIGHT
AUTO SHTR
Mode
——
——
zON
AUTO
AUTO
HIGH
zNORMAL
LOW
——
zON
OFF
zON
OFF
Meaning
To suit your specific shooting requirement (p. 60)
To add special effects like those in movies or on
the TV to images (p. 56, 72)
To fire the flash (optional) regardless of the
brightness of the surroundings
To fire the flash (optional) automatically
To fire the flash (optional) before recording to
reduce the red-eye phenomenon
To make the flash level higher than normal
To use the normal setting
To make the flash level lower than normal
To adjust the white balance (p. 49)
To use the NightShot Light function (p. 34)
To cancel the NightShot Light function
To automatically activate the electronic shutter
when shooting in bright conditions
To not automatically activate the electronic
shutter even when shooting in bright conditions
POWER
switch
CAMERA
MEMORY
VCR
CAMERA
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
Note on FLASH MODE and FLASH LVL
You can use FLASH MODE and FLASH LVL only when the external flash (optional) is
set.
Note on FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the
flash level.