189
Customizing Your Camcorder
Changing the menu settings
Icon/item
MEMORY SET
SLIDE SHOW
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
PRINT SET
9PIC PRINT
DATE/TIME
Mode
——
——
zSERIES
RESET
——
zRETURN
OK
zRETURN
SAME
MULTI
MARKED
zOFF
DATE
DAY&TIME
Meaning
To play back images in a continuous loop (p. 155)
To copy still images on a tape onto a “Memory
Stick” (p. 146)
To assign numbers to file in sequence even if the
“Memory Stick” is changed
To reset the file numbering each time the
“Memory Stick” is changed
To delete all the unprotected images (p. 159)
To cancel formatting
To format an inserted “Memory Stick.”
Formatting erases all information on the
“Memory Stick.”
Check the contents of the “Memory Stick” before
formatting.
1. Select FORMAT with r/R, then press EXEC.
2. Press r/R to select OK, then press EXEC.
3. After EXECUTE appears, press EXEC.
FORMATTING flashes during formatting.
COMPLETE appears when formatting is finished.
To stop 9PICS print
To execute SAME PICS print (p. 161)
To execute MULTI PICS print
To print images with print mark arranging them
in order of recording
To make prints without the recording date and
time
To make prints with the recording date (p. 162)
To make prints with the recording date and time
POWER
switch
MEMORY
VCR
VCR
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
Notes on formatting
•Do not do any of the following while FORMATTING is displayed:
–Change the POWER switch position to others
–Operate buttons
–Eject the “Memory Stick”
•The “Memory Stick” supplied with your camcorder has been formatted at factory.
Formatting with your camcorder is not required.
•You cannot format the “Memory Stick” if the write-protect switch on the “Memory
Stick” is set to LOCK.
•Format the “Memory Stick” if “ FORMAT ERROR” appears.
•Formatting erases protected image data on the “Memory Stick.”
Note on PRINT SET
9PIC PRINT and DATE/TIME are displayed only when an external printer (optional) is
connected to the intelligent accessory shoe.