Filter
Top Products
115
“Memory Stick
” Operations
Inserting a “Memory Stick”
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing up as illustrated.
Ejecting a “Memory Stick”
Slide MEMORY EJECT in the direction of the arrow.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off , eject a “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
If “ FORMAT ERROR” is displayed
Reinsert “Memory Stick” a few times. The “Memory Stick” may be damaged if the
indicator is still displayed. If this occurs, use another “Memory Stick.”
MEMORY EJECT
“Memory Stick” slot
Access lamp
Using a “Memory Stick” – Introduction